Warm Home in Cold Winters with Radiant Floor Heating

Warm Home in Cold Winters with SunTouch Radiant Floor Heating
Solar heating technology has come a long way, with energy being tapped and utilized more effectively. There are innumerable uses of solar energy in households and commercial set-ups, which is conventionally converted to thermal energy and used for heating water, heating home or pool. However, solar heating activities depend on the amount of solar radiation received by the surface area and surface reflectance. Moreover, other factors such as surface emissivity, ambient temperature and thermal convection from wind also play significant part in solar heating.
SunTouch Radiant Floor Heating option is an excellent solution, worth consideration while planning for cold winter months. The method has several advantages, most notable being energy saver, reduced utility costs and clean energy. A radiant floor heating system is viable with solar energy, due to relatively low temperature of hot water that solar systems produce very efficiently. There are several radiant floor heating systems, such as masonry heater and gas boiler, which accept heat energy from sun.

The advanced dual-wire technology of SunTouch Radiant Floor Heating allows homeowners to install mats that end at preferred location. These mats are flexible option for heating, as mat can be positioned in various angles such as 90° and 180°. Entire section is heated thoroughly as wires can be fitted easily at any angle and into curves. However, open weave design of the wire mesh is recommended owing to strong bonding of the thinset to the surface, above as well as beneath the heating mat. For an ideal floor warming application, wire spacing limit is determined to be within 90°.
A heating cable, a foil radiator and a set of power leads for connection to the floor-sensing control are the integral components of the SunTouch Radiant Floor Heating Mats. The heating mats are Aramid reinforced and have ETFE high-temperature insulation along with oxygen-free copper alloys and XLPE (PEX) jacket. These heating mats are appreciated for easy installation, easy connection establishment, convenient management and safe usage.
To ascertain maximum safety, heating element mesh is woven beside the mat in a ring-like shielded jacket. The set-up facilitates power supply to the grounding wire within the junction box for the thermostat. Along with safety and intrinsic attributes, homeowners have appreciated SunTouch Radiant Floor Heating system for its aestheticism.

After continual research and development, solar floor heating systems have become immensely effective and efficient. Over the years, these systems have also provided architectural flexibility to the users and can be installed in any part of the house. Moreover, installation of SunTouch Radiant Floor Heating system reduces amount of air pollution by limiting greenhouse gases that are emitted using alternative fuels such as oil, propane and natural gas for heating. In case the solar system cannot meet heating requirements, back-up systems can be synchronized for heat supply.
For ensuring warm home in cold winters, one can choose SunTouch Radiant Floor Heating. However, planning the layout of the electrical floor heaters, budget and daily or yearly projections are some of the basics that need to be considered by homeowners before availing this solution.
Buy now at Flooring Supply Shop
Copyright © 2010 FlooringSupplyShop.com

The Facts about SunTouch Radiant Floor Heating

SunTouch Radiant Floor Heating is an underfloor heating system that aids in keeping the indoors as well as outdoors warm. A type of electric radiant floor heating, this low temperature heating system emits radiant heat from under the floor surface that heats the air; subsequently making the house warm. The twin, multi-stranded and oxygen-free copper heating elements form the heart of this system, augmenting its utilization and longevity. Furthermore, the strong synthetic Aramid fibers reinforce these heating wires and add to their longitudinal strength.
The dual-wire technology of SunTouch Radiant Floor Heating allows user to initialize the mat at the thermostat and end at any of the desired locations. Another benefit of this heating system is that the mat can be flipped and turned at 90° and 180°, so as to fill in virtually any shape. The wire can thus be easily released and fitted into angles or curves, leaving no gap. Moreover, the open weave design of the wire mesh facilitates strong bonding of the thinset to the surfaces, both above and below the heating mat. Typically, wire spacing is determined not to exceed 90° C for ideal floor warming application.
For maximum safety, the heating elements are woven to the underside of the mat, and are ringed by a fully shielded grounding jacket. This set up further extends the power lead to the grounding wire in the junction box for the thermostat. Besides the benefits provided by intrinsic features of the SunTouch Radiant Floor Heating, the system has also won accolades for its aestheticism. Unlike heat pumps and vents, this system is laid beneath the floor surface and is thus, completely invisible. Moreover, efficient installation of the floor heating system also avoids the risk of direct contact with the heating element.

This system further delivers an even radiant heat across the whole floor surface; whilst, heating the home from the floor up. All one has to do is program the thermostat as per the lifestyle, and the rest is assured by the system itself. Optimization of energy costs due to rapid distribution of heat, easy regulation of temperature, and precise control of heating are other advantages of the system. Moreover, the uniform heat spread does not create heat droughts that lift up dust and allergens. Thus, the SunTouch Radiant Floor Heating enables user to achieve a uniformly heated home in a healthy way.
Owing to all these advantages, the SunTouch Radiant Floor Heating has rapidly replaced conventional heating systems like boilers and heat pumps, which are inefficient as well as expensive.
You can learn more when you visit www.flooringSupplyShop.com
Copyright © 2010 FlooringSupplyShop.com

Warm cozy Floors home during winters

Winters are beautiful and visually appealing with plenty of snowfall, however this also leads to drop in temperature, beyond comfort One of the biggest discomforts in the winter season are cold floors. This problem however, can be rectified by installing rradiant floor heating system which will keep the flooring as well as the interiors of your house, warm all through the freezing winter season. These affordable and easy to install radiant heating system are increasingly being used by individuals around the world.
The thermostat controlled heating system installed in your house keeps the air warm and not the floor, which results in significant difference between the air and floor temperature. However, with the radiant floor heating system you can easily eliminate the discomforts caused due to the cold floors. These are safe, cost effective and can be installed under any type of flooring such as tile, concrete, asphalt or brick with ease. Radiant floor heating systems prove beneficial even for clearing up the snow from driveway, stairs and patios.

However, before purchasing radiant floor heating systems, one needs to take into consideration certain important factors. Radiant floor heating systems should be certified safe and easy to install. Another important consideration is the system’s heat output, which can be varied as per individual choice. In case one wants a warm floor then you need a moderate heating system with low output, however if you want to keep the entire room warm, then you need a system with higher output. Moreover, one must choose a system with a thermostat control which can be conveniently programmed according to the need and maintain optimum temperature throughout the day. This ensures that there is no wastage of energy, which results in low power consumption. Furthermore, since higher EMF is associated with certain ill effects, hence you consider a system that works effectively and does not increase the EMF significantly. There are many reliable companies in the market which offer customized floor heating systems to meet your specific requirements in terms of size and dimensions, thereby enabling you to install these systems anywhere, be it kitchen, bathroom or outside.
There are so many advantages offered by the radiant floor heating system offers that it has become a must for winters. There is no need to make alteration to the room décor as these heating systems are installed below the flooring, without significantly raising the floor level, as it has compact dimensions. Moreover, these systems can be easily installed below any type of flooring, be it tiles, carpet or hardwood; and has minimal maintenance needs. The radiant floor heating systems are ideal for keeping not just the floors but interiors of the home warm as well; consequently you can turn down your main thermostat by few degrees and save on the power bills.

Hence, to have warm and comfortable winters, get the “radiant floor heating system” installed at your place before the start of the winter season. Moreover, this is one luxury which is efficient as well as affordable.
Copyright © 2010 FlooringSupplyShop.com

Options for warm flooring

You might have installed effective heating systems in your house to tackle the winter chills, but the problem of cold floor will still remain. Stepping on the cold floor can be quite uncomfortable, irrespective of the heated air in the house. It is for this reason that you should look at ways of ensuring that your floor remains warm and comfortable during the winter seasons.
One of the most popular ways of ensuring a warm floor is using a radiant floor heating system. Other ways include insulating the basement ceiling and using rugs on the floor. Your choice of a floor heating option will depend on various factors such as your budget, the size of your rooms and the construction of your house. Apart from keeping your feet warm, a heated floor will also save on your energy costs by minimizing the use of your main heating system.
One of the main reasons for a cold floor is the chill air in the basement. It is for this reason that you should look at insulating your basement ceiling to ensure that the floor above remains warm. However, insulating the basement ceiling will make that area even cooler; therefore, you should insulate the basement ceiling only if you do not spend much time there. In case you spend a considerable amount of time in the basemen then you should look at insulating the basement walls instead. This will warm the floor above along with keeping the basement warm as well.

If you do not wish to insulate your basement then covering your floor with rugs would be effective. This is a cost effective solution that is ideal for small sized floors. In case you wish to warm your entire house, or a large floor area of the house then you should consider a radiant floor heating system.
A typical radiant floor heating system consists of electric resistance elements that are installed beneath the flooring of a room. These radiant floor heating systems use radiated heat to warm the floors, thereby resulting in maximum effectiveness. Furthermore, one of the biggest advantages of a radiant floor heating system is that it not only warms the floor, but also warms the entire room. This results in an increase in the temperature of the house, thereby allowing you to turn down your main thermostat by a few degrees. The heat emitted by these systems does not dry your skin, as the heat of a blow air heating system does. It is due to such advantages that installing a radiant floor heating system has become the preferred choice of numerous homeowners.

There are numerous ways by which you could ensure warm floors even during the cold winter seasons. Out of all the methods, installing a radiant floor heating system is probably the most effective one. These systems are generally quite easy to install, and consume minimal electricity. One of the biggest advantages of these floor heating systems is that they can be installed beneath different types of flooring, be it stone, ceramic or hardwood.
Copyright © 2010 FlooringSupplyShop.com

The increasing popularity of DIY projects in the current slowdown

Most people refrain from undertaking a DIY project since they neither have the expertise nor the tools to complete it in an effective manner. Further, the fear of expensive repairs and maintenance in the future in case the project goes wrong also deters a number of prospective DIY enthusiasts. However, the current economic slowdown has forced people to look at different ways to save money, and DIY projects instead of hiring a contractor as one such option.
Although there is no comparison between a DIY enthusiast and a professional contractor in terms of the experience and availability of resources, one factor that makes DIY project more attractive is the cost attached to it. What you would be charged by a professional contractor would be significantly higher as compared to what you would incur if you completed the job yourself. This financial motive is one of the biggest reasons why the current slowdown has resulted in an increased number of Do It yourself enthusiasts.
Although financial motive is important, the sense of achievement involved with completing a job is something that is characteristic of a DIY project. The fact that you get to call something your own is what attracts most people to completing a job themselves rather than hiring a professional contractor.
One of the most important benefits of hiring a professional contractor is the years of experience and the resources that they bring into a project. You can easily check on the references provided by contractors to know about the previous work done by them. Further, professionals have all the tools and equipments that would be required to complete a job. Although a DIY enthusiast cannot match up to the experience levels of a professional contractor, it has become very easy to get access to high grade tools and equipment in an affordable manner.
Be it tiling, carpentry, or a plumbing job; you would require a specialized set of tools to complete the task at hand. Without the right resources you would not be able to achieve the right finish; thereby resulting in future repairs and maintenance costs. However, you can easily find highly effective tools and resources such as the grout grabber, Pro Pan, Kirb perfect, tile sealers, Tuscan Leveling System and trowels on the internet. These resources will not only make your job much easier but will result in a much more defined and finished look to your renovation work.
Although the financial slowdown is what is forcing people towards Do It Yourself projects, it is not as easy as it sounds. A DIY work gone wrong can result in more repairs and maintenance expenditure than what a professional contractor would have charged. It is for this reason that you should properly analyze the job at hand and should be prepared with the right tools and equipment before starting your project. A properly completed DIY project will give you a sense of achievement and will save you on a lot of financial expenditure.
Copyright © 2010 FlooringSupplyShop.com

Eco Pads Diamond Stone Polishing instructions

Edit this entry

Floor Machines

17” – 20” (175-350 rpm)

Pads remove wear and provide a variety of appearance levels from dull hone (no shine) to highly polished. Use on floors with little to no lippage (uneven tiles).

Instructions

• Sweep or vacuum surface to remove abrasive soil
• Clean and rinse surface thoroughly prior to pad use
• Center selected pad on drive plate of floor machine
• Apply water to 2’ x 5’ area to lightly wet the surface – no need for huge puddles
• Move the floor machine in an oval pattern counter clockwise to keep the water inside the work area
• Check surface after 15 – 30 seconds to see if desired results are achieved
• If YES, repeat steps above on the rest of the floor one section at a time
• If NO, repeat polishing process until desired result is achieved (usually 15 – 45 seconds per 2’ x 5’ area)
• If second polishing does not achieve desired results, change pad grit level and repeat process

Hand Polishers

7” Variable Speed (600-3000 rpm)

Pads remove wear and provide a variety of appearance levels from dull hone (no shine) to highly polished. Use on floors, walls and counter tops with little to no lippage (uneven tiles).

Instructions

• Dust or vacuum surface to remove abrasive soil
• Clean and rinse surface thoroughly prior to pad use
• Center selected pad on drive plate of hand polisher
• Apply water to 2’x 3’ area to lightly wet the surface – no need for huge puddles
• At lowest speed setting, move the tool in an oval pattern counter clockwise to keep the water inside the work area
• Check surface after 15 – 30 seconds to see if desired results are achieved
• If YES, repeat steps above on the rest of the area one section at a time
• If NO, repeat polishing step until desired result is achieved (usually 15 – 45 seconds per 2’ x 5’ area)
• If second polishing does not achieve desired results, change pad grit level and repeat process

TIPS

• For best results with a 175 rpm Floor Machines use a 60 lb drive plate (not necessary for 300 – 350 rpm machines)
• Use more water when using lower grits (200 – 1,500)
• Use more weight (or pressure) and less water on higher grits (3,000 – 11,000)
• Overlap sections by 4”- 6” to keep an even appearance
• Rinse area thoroughly prior to changing grits
• Rinse and allow pad to dry after each use

• Avoid contaminating the EcoPads™ by using them only on a clean surface.
• Pad contamination is a major problem. This is how most people ruin the pads; they don’t wear them out.
• Thoroughly clean and rinse the surface to be polished before using the pads.
• Store the pads in the box making sure that the pads are NEVER diamond face to diamond face.
• Stack them with the colored side up.
• It is better to under use the pads than to overuse them.
• Overusing the 200 grit brown EcoPad™, the 400 grit black EcoPad™, or 800 grit red EcoPad™ may result in a textured appearance or the “orange peel” effect. That can only be removed by honing the floor with a resin bond diamond pad.
• You only need enough water to keep the surface wet; you don’t need puddles.
• Edge work can be done by using the 5″ or 7″ pads with a hand tool.

Eco friendly Instruction for polishing Granite and Marble

Eco friendly Instruction for polishing Granite and Marble- Read